How to Build Your Own DIY Sensory Table

at Home

How to Build Your Own DIY Sensory Table at Home: Dive into this creative project to craft a unique sensory table filled with fun textures and colors.

What You’ll Need

Milled lumber: boards from larger timber or pre-cut wood.

Two rubbermaid tubs: size based on your preference for the sensory table.

Screws

Paint

Wood filler

Tools to make DIY Sensory Table

Saw

Drill

Screwdriver

Sandpaper

Step #1: Prepare the wood

Start with milled lumber or buy pre-cut wood for convenience. You’ll want to use boards like 2x4s for the table’s frame and legs for added sturdiness.

Step #2: Cut the Wood

Measure and cut the boards to the desired lengths for the table’s sides. For a balanced structure, you’ll need three boards for the short sides and two for the long sides.

Step #3: Assemble the table frame

Attach the legs to the long boards using pre-drilled holes to prevent splitting. If you have access to a Kreg Jig, using pocket holes can create a cleaner look.

Step #4: Install the tubs

Position the Ikea tubs side by side and adjust the frame length to match their combined width. Make sure the tubs sit securely within the frame and don’t shift around.

Step #5: Sand the table

Sand the edges of the wood thoroughly for safety, especially since kids will be using the table.

Step #6: Paint the table

Apply a coat of weatherproof paint, especially if the table will be used outdoors. This will help protect the wood from moisture and wear.

Step #7: Final touches

Allow the paint to dry thoroughly, then sand lightly again to smooth any rough spots. Check all edges for any splinters or bumps that may have formed after the paint dried.

Read the Full Blog

More Posts Like This